Cost of Asbestos Testing
Asbestos is a mineral fiber that occurs in rock and soil. Until 1978, when it was banned as a potentially serious health hazard, Asbestos was used as a flame retardant insulation material, sprayed into walls and ceilings and other structural areas. Asbestos has also been used in a wide range of manufactured goods, mostly in building materials (roofing shingles, ceiling and floor tiles, paper products, and asbestos cement products), friction products (automobile clutch, brake, and transmission parts), heat-resistant fabrics, packaging, gaskets, and coatings. After the ban, manufacturers were still allowed to use up any remaining stock and so some structures built as late as 1986 still contain asbestos. Having asbestos in your home is extremely hazardous. When it ages, it crumbles and flakes, which releases particles into the air. Asbestos is a carcinogen, which can increase the risk of cancer so testing for and removing Asbestos is very important to protect your household and also anyone that walks by it.
Where asbestos may be found:
• Attic and wall insulation produced containing vermiculite
• Vinyl floor tiles and the backing on vinyl sheet flooring and adhesives
• Roofing and siding shingles
• Textured paint and patching compounds used on wall and ceilings
• Walls and floors around wood-burning stoves protected with asbestos paper, millboard, or cement sheets
• Hot water and steam pipes coated with asbestos material or covered with an asbestos blanket or tape
• Oil and coal furnaces and door gaskets with asbestos insulation
• Heat-resistant fabrics
• Automobile clutches and brakes
Cost of Asbestos Testing in a Modern Home
The cost of asbestos testing will vary dramatically based on the size of the building and the scope of the specific project. It is hard to simply look at a material in order to know if asbestos is present, and this usually means that sampling is the first step in the process. A standard “on site” sampling in a modern home, can range from $250 to $750.
Once the presence of the asbestos is determined, it is necessary to then do a full inspection of the entire site. An inspection of this type is going to average between $400 and $800. Inspectors should be federally or state trained and licensed in their line of work. This is important for a large number of reasons, but most significant where safety and resale of the property are concerned. Once the initial inspection is done, the removal begins, which will then incur additional, various costs.
How to Lower the Cost of Asbestos Testing in Your Home
As you can see, the cost of asbestos testing, can weigh heavily on the average homeowner. Most homeowners decline to test for asbestos, feeling that the cost of asbestos testing itself will be too high. Can you imagine paying $350-$750 to sample a piece of floor tile, sheet rock, pipe insulation or a roof shingle?
There is,a simple solution. A do-it-yourself asbestos testing kit with certified lab results will decrease the cost of asbestos testing and will give you accurate information in finding out if you are dealing with asbestos in your home. Obtaining a kit with certified lab results, just like the professionals use, that are legally defensible, will save you hundreds of dollars in the cost of asbestos testing and give you the peace of mind that you and your family need. These do-it-yourself test kits can be found at www.certifiedkit.com.